Camera Hacker

: :

Add Comment | Related Links | TrackBack
Related Content

Canon Powershot SD1200 disassembly?

I got sand in this camera, and I'm trying to disassemble it to get the sand out. I'm trying to remove the casing, and three of the four corners slide out just fine, but the corner by the flash won't budge, like there's a screw in place, and there's no external screw visible. Does anyone know how to take this model apart?

Morgan
Mon, 03 Aug 2009 15:31:51 +0000

You just need to wiggle the two plastic covers by hand & it will separate by it self. The brackets are just above the flash, that is why you encounter this problems.

Blastoise
Tue, 03 Aug 2010 15:52:59 +0000

Old post I know, but I want to conform what Blastoise said. Admittedly a tiny (1x1mm) plastic piece was found along with everything else, so perhaps I removed it a bit forcefully, but nothing looks worse for the wear. After I clean this it should go back together just fine.

DanAdamKOF
Mon, 10 Oct 2011 05:33:54 +0000

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field
Your Name: *
E-mail:
Remember Me!
Comment: *
File attachment is optional. Please do not attach a file to your submission unless it is relevent.
Attach File:
(20 MB Max)
Spam Protection: * Answer of 6 + 3?
Click button only once, please!

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.