Camera Hacker

: :

Add Comment | Related Links | TrackBack
Related Content

How to remove the casing from the olympus stylus 810?

I don't know if anyone has ever tried, but it seems to be exceedingly difficult to move the small screws on the bottom of the olympus stylus. Also, the only screws that I can find on the olympus stylus 810 are two large ones on the side with the wrist strap, two underneath this plate that are partially covered by the casing, and these two small screws on the bottom of the camera ( near the speaker and the tripod port). My guess is that this casing is kept in place by 'clips' around the perimeter, but i dont know how to get to these or how to pop them open without damaging the casing. I have two of these cameras and I plan to have one working one at the end of the project ;)

Anyone who knows how to remove the casing on a stylus 810 or similar i would greatly appreciate instructions.

thanks!

Peter
Wed, 24 Oct 2007 16:11:55 +0000

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field
Your Name: *
E-mail:
Remember Me!
Comment: *
File attachment is optional. Please do not attach a file to your submission unless it is relevent.
Attach File:
(20 MB Max)
Spam Protection: * Answer of 1 + 10?
Click button only once, please!

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.