Camera Hacker

: :

Add Comment | Related Links | TrackBack
Related Content

Some VERY basic advice on adapters

Always inspect your adapter before mounting on to lenses and camera body.
Ensure that the fittings and screw are tight and check the release catch
for defects. Once fitted to the lens will be difficult to remove and need
to use a small flat screw driver to release the pin and allow the rotation
of the adapter to be removed from the lens. Always mount the lens adapter
on to the lens first and remove from the body with the lens adapter.
Otherwise if it jams, you have a problems to take it off and ensure that
the on/off switch of your camera is set to off to prevent damages to your
electronic contacts. Repairs are costly!

Fred Tan
Fri, 31 Jul 2009 02:18:29 +0000

Thanks for the tips, Fred. Your advice is accurate with my Novoflex adapter. If I don't mount it to the lens first then the camera, I'd have a hard time combining the setup.

Chieh Cheng
Fri, 31 Jul 2009 06:21:46 +0000

You are most welcome! I had this problem too and took me some time to figure out
how to solve it. It has not been a problem for me now and as long as you inspect
the mount before attaching to your lens, it will not cause any problems again.
The mounting screws must be tight or the catch will loosen and unable to remove
the adapter from the lens.

Fred Tan
Sat, 01 Aug 2009 23:53:08 +0000

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field
Your Name: *
E-mail:
Remember Me!
Comment: *
File attachment is optional. Please do not attach a file to your submission unless it is relevent.
Attach File:
(20 MB Max)
Spam Protection: * Answer of 9 + 0?
Click button only once, please!

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.