Hi i work with vb.net 2005 to take picture from canon EOS 20d i have
the EDSDK and the sample code for vb.net so i did that:
1- install the driver for the camera
2- connect the camera to the pc
3- copy the all .dll files to the debug folder
4- open the project with visual basic.net 2005
5- i push f5 to debug
after these steps it work good and take picture as i want butthe
1- in the first time i make debug it work well, but any more if i
close the exe and try to debug again i have just empty comboboxs
(which have the AEmode,Tv,Av,....)and the "take picture" botton has
no activity but if i turn off the cammera for a littel time and try
again it sometime work and some not i cannot find the cause!!!
2- the capture is very very slow,so only what i need to take
picture,i don`t care about the controllers like(iso,metering mode,...)
to be adjusted from the pc if it will be more fast, in exact i want
it more fast with any condition
I am not full experienced in v.net enough to make such a code
function. Any help or suggestions would be much apreacciated. Thanks
Sat, 12 Aug 2006 14:50:36 -0700
Did your message disappear? Read the Forums FAQ.
Spam Control | * indicates required field
TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.
No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.
Messages, files, and images copyright by respective owners.