Sony cybershot: I push power to turn on camera and get a black screen with the word 'access' and the lens goes in and out continually. Any suggestions? Battery ...

Aug 10, 2007 · The fix is real easy. No need to take the camera apart. Order the Shutter Button Release Assembly from Sony. Cost was around $18.00 + tax + ...

May 23, 2011 · 1. Turn OFF cam · 2. Remove the battery or the power supply · 3. Turn the switch to CAMERA for about 30 sec · 4. Turn the switch to OFF · 5. Install ...

Jun 28, 2007 · I have a sony DSC-W70 and I keep getting an error thats says "turn the power off and on again. The lens seems to be jammed because it opens and ...

i have a sony cybershot dsc t10 camera which shows error message E:61:10...i tried taking the battery out and tapping it on the sides..IT DID NOT WORK..i tried ...

May 29, 2007 · Reset the camera (page 74), then turn the power on again." The following screen shot of the RESET button location came out of the PDF manual.

The idea is to drill a hole through the cover to expose the LED. You can do this mod with an electric drill and a small drill bit. I used a 1/16" drill bit to ...

It took care of my E61:00 problem. The reset button on my DSC-P50 is not identified in the manual, but I found it on the bottom of the camera. On some cameras ...

All you have to do is connect the cable, turn on the camcorder, and switch it to "Memory" or "Playback" mode (depending on the specific camcorder). Windows ...

The Sony DSC-P92 has a 5 mega-pixel (MP) sensor. It also supports 4.5 MP (3:2), 3.1 MP, 1.2 MP, and VGA mode. Captured photos are stored on Memory Stick PRO in ...