Oct 28, 2004 · Hey Cheng! The plastic ring that holds the lens in place is cracked and the camera can only focus when the zoom is all the way out. When I turn ...

To clean such a smudge off can be an extremely tiring exercise. Since you can't get your whole finger through the lens opening, you can't really put the lens ...

Step 4: Unscrew the four silver screws that secure the metal lens mount to the lens. Note, at this step, the plastic inner ring should have already been removed ...

To remove the back casing, remove all of the tiny machine screws surrounding the back casing. There is one screw on the left side, one screw on the bottom, and ...

Taking it apart is quite easy. Use a sharp X-acto knife to slice around the seam. The seam is just a really thin piece of plastic.

May 8, 2007 · When I push the "playback" button, the LCD menu comes on and stays on, but I can't get the lens to retract or the camera to otherwise operate.

The only way for me to remove the front lens element is to rotate each one to the top and push each one downward.

Sep 30, 2010 · Panasonic HDC-TM700 3D hack. I found ... But that couln't intimidate me, I dismantle the lens, which is total mechanical, and get rid of the knots ...

Step-by-step instruction on making a Canon EOS pin-hole lens. Same steps may be followed for other camera systems.

After removing the case cover, you can see that the sensor board and the lens takes up very little room in the case. There are a lot of empty space. Maybe it's ...