The instruction manual suggested that the adapter is to be attached to the lens first. Then the lens and the adapter are to be mounted to the camera body.
Grind the MD lens half a millimeter where it "sits" on the camera mount. Trim the MD mount. From there fit another mount that can be taken by the EOS. Not ...
eyepiece to make telephoto lens into telescope - Camera Hacker
www.camerahacker.com › Forums › Dis...
I have obtained a "Minolta Lens/Monocular Converter" & found a company called SRB Film in Luton, England who are very helpfully prepared to convert the ...
This lens adapter can be used to attach accessory lenses and filters. It has a front 30 mm screw thread for attaching 30 mm conversion lenses, filters, or ...
Finally, I decided to disassemble it and try to fix it. I have always wanted to see the inside of a Canon EF lens anyway. Step 1: Unscrew the three tiny screws ...
Step-by-step instruction on making a Canon EOS pin-hole lens. Same steps may be followed for other camera systems.
I am using Nikon F70 and I put my Carl Zeiss Jena Flektagon 20mm F2.8 onto. The lens was modified. Normally, you need to have a adaptor just like Paulofranco.
The camera monitors a switch on the lens mount. Each lens has a tab for mounting. On auto lenses, the tab is longer, thus triggering the switch. The tab is ...
Jury-rigging cables for video transfer.
To clean such a smudge off can be an extremely tiring exercise. Since you can't get your whole finger through the lens opening, you can't really put the lens ...