Camera Hacker

Wiki

Older Revision of Canon Battery Pack LP-E8 Pinout

Revision: 20120930_121823 | All Revisions


Canon Battery Pack LP-E8 Pinout

The Canon Battery Pack LP-E8 is a Li-ion 7.2v battery with a capacity of 1120 mAh (8.1Wh). Photo below shows the Canon Battery Pack LP-E8 and it's specifications.

The battery pack has four electrical female pins. If you look at the bottom of the battery with the pins toward the top, you'll see that the left-most pin is the positive (+) pin and the right-most pin is the negative (-) pin. The two electrical contacts in the middle are not labeled.

Luckily we have a third-party LP-E8 battery pack, which does show the two middle electrical contacts (photo below). We can see the the left pin in the middle is 'D', while the right pin is 'T'.

On a side note, this aftermarket battery has 1350 mAh capacity that is larger than the Canon battery pack. We also found a 2000 mAh capacity LP-E8 battery on Amazon (see "Related Links" section below).

Comments & Discussion >>

Compatibility

The Canon Battery Pack LP-E8 is compatible with the following digital SLR cameras:

  • Canon EOS Rebel T2i
  • Canon EOS Rebel T3i
  • Canon EOS Rebel T4i
  • Canon EOS 550D
  • Canon EOS 600D
  • Canon EOS 650D
  • Canon EOS Kiss X4
  • Canon EOS Kiss X5
  • Canon EoS Kiss X6i

Comments & Discussion >>

Canon Battery Charger LC-E8E

The Canon Battery Charger LC-E8E comes with the Canon EOS Rebel T3i to charge the Canon Battery Pack LP-E8. This battery charger has four male pins. However, the two middle pins are also not labeled.

The charger charges the battery at 8.4v and 0.72A. (See photo above.)

Comments & Discussion >>

Related Links