Camera Hacker

: :

Add Comment | Related Links | TrackBack
Related Content

Pinout on the RM-CB1 remote connector?

I would like to know the pin arrangement on the RM-CB1 shutter release cable for the E3, E1, E10, E20, E20N, E100RS, and I believe the C2500L cameras. The connector has a groove, like a keyway, that orients the pins to the correct holes. I just need to know which pins are for which function. There are three pins, ground, full-press, and half-press. One pin is directly opposite the groove, one is to the left and the other is to the right. Which is which? When you reply, it would be helpful if you specify if you are talking about the pins or the holes when you say the one on the right or the left. Thanks.

silverfox
Thu, 28 Aug 2008 00:22:14 +0000

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field
Your Name: *
E-mail:
Remember Me!
Comment: *
File attachment is optional. Please do not attach a file to your submission unless it is relevent.
Attach File:
(20 MB Max)
Spam Protection: * Answer of 10 + 7?
Click button only once, please!

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.