This equipment connects the digital camera body to the Canon Compact Power Adapter CA-PS400 (the dual BP-511 battery charger), which then connects to the AC ...

Oct 8, 2007 · The pack has a saftey chip. Each of the 2 cells is monitored for correct voltage range (4.20v is max and the min is around 2.5 to 3.0). If ...

The battery pack has four electrical female pins. If you look at the bottom of the battery with the pins toward the top, you'll see that the left-most pin is ...

When the button on the remote control is pushed all the way, all three contact sections are shorted together, causing the camera shutter to be released. Pin 1 ...

So I attached a 9-volt battery to the BP-511 battery pack and plugged it into the Canon BG-ED3 Battery Grip (see photo below) and turned on the camera. Quite ...

In this article, I will show you how I turned my dead Canon BP511 into a dummy battery interface for experimental purposes. After disassembly the battery pack, ...

I have a few ideas on what to do with this battery pack. I could 1) rebuild it with new battery cells; or 2) turn it into a dummy battery interface so I can use ...

Canon DC Coupler DR-400 Pinout Pinout information for the Canon EOS Digital Rebel (300D), D30, D60, 10D, 20D, 30D, and 5D digital camera power accessory ...

All three pins are spring-loaded and can fully retract into the connector body. Looking at the Canon T3 connector on the male side (on the remote switch), the ...