Camera Hacker

: :

Add Comment | Related Links | TrackBack
Related Content

d70s: cable release burned by 12v

Hello!

i�ve shot my cable release/camera trigger accidentally by putting on 12v. in regular conditions, there is a voltage at the cable release pin of round about 5v and the camera release at short circuit (by cable release trigger button). last weekend, i�ve takken a mistake connection at my light barrier and this cable release got the light barrier power source of 11v. now, the camera release continously after turning on in m-focus mode like the trigger is pressed the hole time. in af-mode, the af works and the camera takes one picture. menu is not accesible as it is also disabled when pressing the trigger.
does anybody have a schematic of the release circuit inside the camera to outline the burned parts or does anybody have an idea for repairing?
(i need the camera this weekend and nikon will take his time and will replace a whole platine to make money)

thanks a lot,

manu

manu
Tue, 06 May 2008 07:35:53 +0000

Add Comment | Related Links | TrackBack
Related Content

Did your message disappear? Read the Forums FAQ.

Add Comment

Spam Control | * indicates required field
Your Name: *
E-mail:
Remember Me!
Comment: *
File attachment is optional. Please do not attach a file to your submission unless it is relevent.
Attach File:
(20 MB Max)
Spam Protection: * Answer of 3 + 0?
Click button only once, please!

TrackBack

TrackBack only accepted from WebSite-X Suite web sites. Do not submit TrackBacks from other sites.

Send Ping | TrackBack URL | Spam Control

No TrackBacks yet. TrackBack can be used to link this thread to your weblog, or link your weblog to this thread. In addition, TrackBack can be used as a form of remote commenting. Rather than posting the comment directly on this thread, you can posts it on your own weblog. Then have your weblog sends a TrackBack ping to the TrackBack URL, so that your post would show up here.

Messages, files, and images copyright by respective owners.